0

Full Content is available to subscribers

Subscribe/Learn More  >

Study of Thermo-Physical Properties of Selected Nickel-Based Superalloys With Use of DTA Method

[+] Author Affiliations
Jana Dobrovska, Simona Zla, Bedrich Smetana, Vlastimil Vodarek

VSB - Technical University of Ostrava, Ostrava, Czech Republic

Frantisek Kavicka

Brno University of Technology, Brno, Czech Republic

Paper No. ESDA2012-82975, pp. 101-105; 5 pages
doi:10.1115/ESDA2012-82975
From:
  • ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis
  • Volume 3: Advanced Composite Materials and Processing; Robotics; Information Management and PLM; Design Engineering
  • Nantes, France, July 2–4, 2012
  • Conference Sponsors: International
  • ISBN: 978-0-7918-4486-1
  • Copyright © 2012 by ASME

abstract

The presented paper deals with study of thermo-physical properties of cast complex alloyed nickel based superalloys IN713LC, IN738LC and IN792-5A. In this work the technique of Differential Thermal Analysis was selected for acquisition and comparison of the phase transformation temperatures. The samples taken from superalloys in as received state were analysed at heating and cooling rates of 1, 5, 10, and 20 K/min using the experimental system Setaram SETSYS 18TM. Moreover, the transformation temperatures for zero heating/cooling rate were calculated. Based on a comparison of these temperatures it is possible to make the following conclusions: (i) The alloy IN792-5A has the highest temperature of solubility of the strengthening phase γ′ (1235°C); (ii) the highest liquidus temperature (heating) obtained by extrapolation was found in the alloy IN713LC (1349°C), the lowest solidus temperature (heating) was found for the alloy IN738LC (1212°C); (iii) At cooling an undercooling occurred in all alloys. In general it may be stated that the biggest under-cooling (TS, 47°C) was recorded in the alloy IN792 5A; (iv) The width of the interval of the heat treatment window was the biggest in alloy IN713LC (44°C); (v) The alloy IN738LC is characterised by the widest interval of melting (124°C) and solidification (134°C), while the alloy IN792 5A has the narrowest interval of melting (82°C) and at the same time almost the same interval of solidification as the alloy IN738LC (129°C); (vi) The obtained phase transformation temperatures were compared with the values of phase transformations temperatures calculated on the basis of established relationships. In order to obtain more precise description of the behaviour of Ni-based superalloys, during controlled heating/cooling of the initial material (as received state) during DTA analyses, all the samples of superalloys were subjected to a phase analysis using scanning electron microscopy. The course of phase transformations, in all the studied superalloys (IN713LC, IN738LC, IN792 5A) is likely to run according to the following reaction scheme (L = melt): L ↔ γ, L ↔ γ + MC, L ↔ γ/γ′, L ↔ γ + minority phases (such as M3B2, phase η), γ ↔ γ′.

Copyright © 2012 by ASME
Topics: Nickel , Superalloys

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In