0

Full Content is available to subscribers

Subscribe/Learn More  >

An Approach for Evaluating the Integrity of Plain Dents Reported by In-Line Inspection Tools

[+] Author Affiliations
Joseph P. Bratton, Thomas A. Bubenik, Shane Finneran, Hans Olav Heggen

Det Norske Veritas (USA), Inc., Dublin, OH

Tom Alexander

TD Williamson Canada ULC, Toronto, ON, Canada

Paper No. IPC2012-90643, pp. 885-894; 10 pages
doi:10.1115/IPC2012-90643
From:
  • 2012 9th International Pipeline Conference
  • Volume 2: Pipeline Integrity Management
  • Calgary, Alberta, Canada, September 24–28, 2012
  • Conference Sponsors: International Petroleum Technology Institute, Pipeline Division
  • ISBN: 978-0-7918-4513-4
  • Copyright © 2012 by ASME

abstract

Current federal regulations in the U.S. require excavation of plain dents identified through in-line inspection surveys based primarily on depth. Industry experience, and previous research, has shown that the depth of the dent, alone, is not sufficient to assess dent severity and that releases could occur at dents below the excavation threshold (Dawson, 2006). Canada’s National Energy Board released a safety advisory on June 18, 2010, to all companies under their jurisdiction regarding two incidents involving shallow dents. The safety advisory stated that all integrity management programs should be reviewed and updated where appropriate to address the threat posed by shallow dents. Similar incidents have raised awareness in the United States and elsewhere around the world.

This paper focuses on the fitness for service of dents identified by in-line inspection surveys. The fitness for service assessment provides an estimated remaining life of a dent based on the geometry of the dent and current pressure cycling of the pipeline. Dynamic pressure cycling at each dent location is estimated using the upstream and downstream pressure cycle data, elevation, and distance along the pipe. The dynamic pressure cycle data at each dent is then converted into equivalent stress cycles based on the results of rainflow cycle counting.

Maximum strain levels of the dents are calculated based on the geometry of the dent as determined by radial sensor measurements from the in-line inspection survey. The combination of assessment methods provides estimates of remaining fatigue life and peak strain which can be used for prioritizing the investigation and remediation of plain dents in pipelines.

Finite element analysis (FEA) is performed for one dent to calculate the maximum strain levels and identify stress concentration areas. These results are compared with the values applied during the fitness for service assessment to validate the accuracy and conservatism of the calculation methods used. An idealized dent will be analyzed to investigate the strain calculations in ASME B31.8 and localize maximum strain values.

Copyright © 2012 by ASME
Topics: Inspection

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In