0

Full Content is available to subscribers

Subscribe/Learn More  >

Predicting Hydrodynamic and Heat Transfer Effects of Sparger Geometry and Placement Within a Column Photobioreactor Using Computational Fluid Dynamics

[+] Author Affiliations
Ghazi S. Bari, Stephen P. Gent, Taylor N. Suess, Gary A. Anderson

South Dakota State University, Brookings, SD

Paper No. ES2012-91139, pp. 785-794; 10 pages
doi:10.1115/ES2012-91139
From:
  • ASME 2012 6th International Conference on Energy Sustainability collocated with the ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology
  • ASME 2012 6th International Conference on Energy Sustainability, Parts A and B
  • San Diego, California, USA, July 23–26, 2012
  • Conference Sponsors: Advanced Energy Systems Division, Solar Energy Division
  • ISBN: 978-0-7918-4481-6
  • Copyright © 2012 by ASME

abstract

This project investigates the effects of sparger geometry and placement on bubble and fluid flow patterns and convective heat transfer within a column photobioreactor (PBR) using Computational Fluid Dynamics (CFD). Experimental and computational studies have been completed that focused on the hydrodynamics and heat transfer within a rectangular column photobioreactor (34.29 cm long × 15.25 cm wide × 34.29 cm tall) with a single sparger located at the center of its base (33.02 cm × 1.27 cm) running lengthwise. This study extends previous work by investigating the flow patterns and heat transfer effects due to full bottom sparger or porous sparger. The gas bubbles and the water-based media within the photobioreactor are modeled using the Lagrangian-Eulerian approach. A low Reynolds k-Epsilon turbulence model is used to predict near-wall flow patterns. A flat surface photobioreactor is used to achieve sufficient light penetration into the system. The main interaction forces between the bubbles and the media, including drag forces, added mass forces, and lift forces are considered. The overarching goal of this research is to produce biofuels and bioproducts through the improved design of column PBRs used for microalgae production. An important factor in designing photobioreactors is the appropriate selection of sparger geometry and placement. The sparger governs the bubble size distribution and gas holdup. These factors in turn influence flow pattern, effective interfacial area, rates of mass transfer, heat transfer, and mixing. It is hypothesized that increasing the sparger width will improve uniformity of bubble distribution as well as mixing. Despite its importance, optimizing the sparger geometry and placement in PBRs for microalgae production is still largely not understood. In this study, the simulation’s results are presented for various spargers, which can be helpful in designing appropriate sparger geometry and proper placement for increased microalgae production.

Copyright © 2012 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In