0

Full Content is available to subscribers

Subscribe/Learn More  >

Dynamic Forced Response of a Rotor-Hybrid Gas Bearing System Due to Intermittent Shocks

[+] Author Affiliations
Luis San Andrés, Keun Ryu

Texas A&M University, College Station, TX

Paper No. GT2009-59199, pp. 689-698; 10 pages
doi:10.1115/GT2009-59199
From:
  • ASME Turbo Expo 2009: Power for Land, Sea, and Air
  • Volume 6: Structures and Dynamics, Parts A and B
  • Orlando, Florida, USA, June 8–12, 2009
  • Conference Sponsors: International Gas Turbine Institute
  • ISBN: 978-0-7918-4887-6 | eISBN: 978-0-7918-3849-5
  • Copyright © 2009 by ASME

abstract

Gas bearings in microturbomachinery (MTM) offer significant system level benefits, such as improved fuel efficiency, reduction in weight and number of components, extending life cycle and maintenance intervals, and reducing NOX emissions with a lower CO2 footprint. Emerging opportunities for gas bearings applications range from automotive turbochargers to engines for business jet aircraft, for example. Gas bearings, because of the inherently low gas viscosity, have low damping relative to oil-lubricated bearings and are prone to wear during rotor start-up and shut down procedures. The lack of damping brings concerns about rotor-gas bearing system robustness and endurance to tolerate shock induced loads, sudden while landing in jet engines, or intermittent in vehicles while moving across a rough terrain, for example. The paper demonstrates the reliability of a hybrid gas bearing system from rotor vibration measurements induced by sporadic shock loads acting on the base of a test rig and while the rotor is coasting down from a top speed of 60 krpm (1000 Hz). In the tests, (1) an electromagnetic pusher delivers impacts to the rig base, or (2) the whole rig is manually tilted and dropped. The test rig consists of a rigid rotor, 0.825 kg and 28.6 mm in diameter, supported on two flexure pivot tilting pad type, hybrid gas bearings, each with four pads and 60% pivot offset and 0.6 mm feeding holes. The bearings are supplied with feed pressures of 2.36, 3.72, and 5.08 bar (ab). Intermittent shocks, up to 30 g pk-pk and exciting a broad frequency range to 400 Hz, produce a remarkable momentary increase of the overall rotor response amplitude, up to 50 μm (pk-pk). The shocks readily excite the fundamental natural frequency of the rotor-bearing system (150–200 Hz), and on occasion the natural frequency (40 Hz) of the whole test rig. For operation at rotor speeds above the system critical speed, the rotor synchronous response is isolated; with transient motions induced by a shock, subsynchronous in whirl frequency, quickly disappearing. Full recovery takes place in ∼0.10 second. The measurements demonstrate that the hybrid gas bearings have enough damping to rapidly attenuate rotor transient motions and to dissipate the energy induced from intermittent shocks. Note that the shocks acted while the rotor traversed its critical speeds. The reliability of engineered gas bearings to forced transient events is no longer in question.

Copyright © 2009 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In