0

Full Content is available to subscribers

Subscribe/Learn More  >

Mechanical Properties of X80 Grade UOE Pipe for Long-Term Exposure at Elevated Temperature

[+] Author Affiliations
Ryuji Muraoka, Mitsuhiro Okatsu, Nobuyuki Ishikawa, Shigeru Endo, Shinichi Kakihara, Joe Kondo, Muneyoshi Murakami

JFE Steel Corporation, Japan

Paper No. IPC2004-0416, pp. 1805-1812; 8 pages
doi:10.1115/IPC2004-0416
From:
  • 2004 International Pipeline Conference
  • 2004 International Pipeline Conference, Volumes 1, 2, and 3
  • Calgary, Alberta, Canada, October 4–8, 2004
  • Conference Sponsors: International Petroleum Technology Institute
  • ISBN: 0-7918-4176-6 | eISBN: 0-7918-3737-8
  • Copyright © 2004 by ASME

abstract

Recently, X80 grade UOE pipes have been planned to apply to steam injecting oil sand recovery systems to increase the volume of steam to be injected and lowering installation cost. The pipes for systems are subjected to high temperature for a long time, such as 350-C, for 20 years. Before real applications of the pipes, it is important to ensure the reliability of the pipes during and after long-term operations. In this study, in order to establish simulation conditions for 350-C × 20 years of operation, the change in microstructure and resulting mechanical properties of X80 grade pipes after a long-term exposure at elevated temperatures were investigated. Then, mechanical properties of the pipes subjected to the established simulated condition were examined. Change in the microstructure was quite small after exposure of 400-C and lower temperatures. Tensile strengths of the base metal and seam weld after up to 400-C of heat treatment can be arranged with the Larson-Miller parameter composed with temperature and holding time of the heat treatments. Therefore, heat treatments at 400-C for shorter than 20 years can be simulation conditions for the operation condition of the systems. As a result of mechanical tests simulating long-term exposure, satisfied performance of X80 grade pipes can be obtained.

Copyright © 2004 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In