0

Full Content is available to subscribers

Subscribe/Learn More  >

Robotic Inspection System for Unpiggable Pipelines

[+] Author Affiliations
Robert Torbin, William Leary

Foster-Miller, Inc., Waltham, MA

George Vradis

Northeast Gas Association, New York, NY

Paper No. IPC2004-0563, pp. 1077-1086; 10 pages
doi:10.1115/IPC2004-0563
From:
  • 2004 International Pipeline Conference
  • 2004 International Pipeline Conference, Volumes 1, 2, and 3
  • Calgary, Alberta, Canada, October 4–8, 2004
  • Conference Sponsors: International Petroleum Technology Institute
  • ISBN: 0-7918-4176-6 | eISBN: 0-7918-3737-8
  • Copyright © 2004 by ASME

abstract

Much of the existing natural gas infrastructure was designed and built without pigging as an operational consideration. There are many physical obstacles in pipelines that make the passage of SMART pigs impossible. The most intractable obstacles include: • Elbows with tight bend radius. • Back to back combinations of elbows. • Partially ported values. • Reductions/expansions greater than two pipe sizes. The use of pigs is totally dependent on the availability of pressure to “push” the pig through the pipeline. Unfortunately, the operation of many utility owned transmission pipelines is at a pressure too low to support the operation of a conventional pig. Although most interstate pipelines are many miles long, many high consequence areas along transmission pipelines are usually extremely short. Many of these pipeline segments are only one to two miles in length with no installed local traps. With the advances in robotics and sensor technology, the Office of Pipeline Safety has recently endorsed the concept that all oil and gas transmission pipelines should be capable of 100 percent inspection. The cost to replace just unpiggable valves and sharp bends has been estimated at over $1.5 billion (gas only). Therefore, the ability to inspect unpiggable pipelines presents a formidable technical and financial challenge. The inspection of unpiggable pipelines requires the marriage of a highly agile robotic platform with NDE sensor technology operating as an autonomous system. Foster-Miller and PII are developing a robot that is essentially a battery powered, train-like platform. Both front and rear tractors propel the train in either the downstream or upstream direction. Like a train, the platform includes additional “cars” to carry the required payloads. The cars are used for various purposes including the NDE sensor module(s), the power supply, and data acquisition/storage components. The onboard distributed intelligence gives the platform the capability of an engineer steering the train through the complex pipe geometry. The robot is designed with a slender aspect ratio and the ability to change shape as required by the physical obstacle presenting itself. The MFL sensor module must also morph itself through the physical obstacles, and thus, will require some level of segmentation. The system requires a very simple launch and retrieval station that is significantly less expensive to deploy.

Copyright © 2004 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In