0

Full Content is available to subscribers

Subscribe/Learn More  >

Systematic Chemical Decontamination Using IF7 Gas

[+] Author Affiliations
Haruhi Hata, Kaoru Yokoyama, Noritake Sugitsue

Japan Atomic Energy Agency, Okayama, Japan

Paper No. ICEM2011-59036, pp. 105-110; 6 pages
doi:10.1115/ICEM2011-59036
From:
  • ASME 2011 14th International Conference on Environmental Remediation and Radioactive Waste Management
  • ASME 2011 14th International Conference on Environmental Remediation and Radioactive Waste Management, Parts A and B
  • Reims, France, September 25–29, 2011
  • Conference Sponsors: Nuclear Engineering Division and Environmental Engineering Division
  • ISBN: 978-0-7918-5498-3
  • Copyright © 2011 by ASME

abstract

Since 1979, Uranium enrichment technology has been researched through the gas centrifuge method, at Ningyo-toge Environmental Engineering Center of Japan Atomic Energy Agency (JAEA). In addition, the Demonstration Plant, that is final stage test facilities, was operating continuously from 1988 to 2001. As a result, a lot of residues accumulated in the plant. Most of this accumulation was found be uranium intermediate fluoride. The basic decommission policy of JAEA is that equipments of gas centrifuge will be decontaminated by sulfuric acid immersion method for clearance and reuse. In our plan, approximately 90% of metals will be cleared and reused, and then the remaining 10% will be disposed of radioactive waste. We propose a combination of sulfuric acid immersion method and the systematic chemical decontamination as an efficient method for decontamination of uranium enrichment facilities. This paper focuses on the method and performance of systematic chemical decontamination using IF7 gas. The following (Figure 1) shows our decommission policy and position of systematic chemical decontamination by IF7 gas for uranium enrichment plant. The IF7 treatment technique belongs to the systematic decontamination technology. It has the high performance decontamination technique for the plant that accumulates the uranium intermediate fluoride, such as UF4 , UF5 , U2 F9 , and U4 F17 , which exist in the uranium enrichment plant through the Gas Centrifuge, called GCF. The one of characteristics of the IF7 treatment, the secondary waste is just an IF5 and little residues. In addition, this IF5 can be reused as materials for making new IF7 gas. The IF7 treatment can also be performed in the room temperature and very low pressure like a 10–45hPa. Furthermore, the IF7 treatment is a simple method using chemical reaction. For this reason, we hardly need to care about secondary reaction with the exception of the reaction with IF7 gas and the uranium intermediate fluoride. This is a very important feature when applying to a large-scale plant. In order to carry out the IF7 treatment, we only set up a few equipments in GCF uranium enrichment plant, which were IF7 feeding equipment and two circulating pumps. IF7 gas cylinders are seated in IF7 feeding equipment. This is the only equipment. Figure 2 shows the IF7 treatment system. We carried out the IF7 treatment for the four cascades in the uranium enrichment Demonstration Plant. The weights of uranium residue in the cascades were approximately 700kgU per cascade prior to the IF7 treatment. In the IF7 treatment, we were able to find the near-optimal processing condition. As a result, we could confirm the IF7 treatment period for one cascade which was 60 days. The main factor to determine the IF7 treatment period is the pressure and the flow rate of reaction product gas (UF6 and IF5 mixture gas) exhausted from the cascade. Although we carried out the IF7 treatment with the maximum value of the flow rate, which our facility has, it is possible to further shorten the IF7 treatment period by setting a higher gas flow rate. Moreover, after the IF7 treatment, we evaluated the uranium recovery rate for cascades and the residues’ uranium weight in the main equipment of GCF. In addition, in the evaluation of the uranium recovery rate, we enable to confirm the uranium recovery rate of all cascades achieved more tan 98%. Furthermore, the average of uranium recovery rate more than 99% in the cascade that has been processed at the end. As a result, radioactive concentration of uranium in the main parts of the GCF fell to 1.0B q/g and below.

Copyright © 2011 by ASME
Topics: Decontamination

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In