0

Full Content is available to subscribers

Subscribe/Learn More  >

Nano-Technology for Improved Dual Layer Performance

[+] Author Affiliations
Meghan Mallozzi, J. Alan Kehr

3M, Austin, TX

Paper No. IPC2008-64591, pp. 851-866; 16 pages
doi:10.1115/IPC2008-64591
From:
  • 2008 7th International Pipeline Conference
  • 2008 7th International Pipeline Conference, Volume 2
  • Calgary, Alberta, Canada, September 29–October 3, 2008
  • Conference Sponsors: International Petroleum Technology Institute and the Pipeline Division
  • ISBN: 978-0-7918-4858-6 | eISBN: 798-0-7918-3835-8
  • Copyright © 2008 by 3M

abstract

Fusion bonded epoxy (FBE) powders and liquid resins are commonly used for corrosion protection of steel pipeline and metals used in the oil, gas and construction markets. The FBE coating should have excellent physical properties to minimize damage during transit, installation and operation. Damage to the coating leads to higher potential corrosion sites on the metallic surface and could ultimately lead to a decrease in service life. During transportation, cinders and grit can get between pieces of the coated substrate so the coating should have superior penetration and abrasion resistance. During installation, the coating should have good impact resistance from back fill or handling equipment. Often the coated substrate is bent during installation, for example to fit the contour of the land, and should be flexible enough to prevent damage to the coating. Once in operation, the coating can be exposed to water and other chemicals and should have good resistance to these chemicals and good cathodic disbondment. There are several ways that have been used conventionally to attempt to make a FBE coating more resistant to mechanical damage. In one conventional approach, the thickness of the overall coating is increased to provide added absorption of impact and abrasion. However, as the thickness of the coating increases the flexibility of the coating decreases. Another conventional approach to enhance damage resistance is to add an abrasion resistant overcoat that has a high filler loading to increase abrasion resistance and decrease impact damage. As with the thicker coatings, higher filler loadings can dramatically decrease the flexibility of the FBE coating. As mentioned above, flexibility of the coating is very important during installation and must be tolerant to bending. Currently available damage resistant coatings force the user to compromise between toughness and flexibility. This paper will present a novel FBE coating system using nano-technology that would incorporate damage resistance AND flexibility.

Copyright © 2008 by 3M
Topics: Nanotechnology

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In