0

Full Content is available to subscribers

Subscribe/Learn More  >

Bonding Strength and Microstructure of SnAg-Based Solid Liquid Inter-Diffusion Bonds

[+] Author Affiliations
Leila J. Ladani, Jafar Razmi

Utah State University, Logan, UT

Paper No. IMECE2009-11454, pp. 107-111; 5 pages
doi:10.1115/IMECE2009-11454
From:
  • ASME 2009 International Mechanical Engineering Congress and Exposition
  • Volume 5: Electronics and Photonics
  • Lake Buena Vista, Florida, USA, November 13–19, 2009
  • Conference Sponsors: ASME
  • ISBN: 978-0-7918-4378-9 | eISBN: 978-0-7918-3863-1
  • Copyright © 2009 by ASME

abstract

Solid Liquid Inter-diffusion (SLID) is a new technology used as interconnects in high density and 3 dimensional packages. This manuscript investigates effect of process parameters, pressure, time and temperature on the strength of bonds and microstructure produced using this technology. A full factorial experiment is designed and implemented on the process with these 3 variables at 3 levels using Sn3.5Ag. Bonds’ strength were then measured using a micro-tester and load displacements were monitored. This analysis shows that SLID bonds form at temperatures much higher than melting temperature of the low melting material. It also shows that time is a significant factor. Bonds that are formed under 10 minutes of time do not show a significant amount of intermetallics. Although the elemental percentage of copper is high in the middle of the bond, it does not reach enough to form any of intermetallic compounds of this ternary system. The specimens fabricated under longer time around 1 hour showed a more brittle, intermetallic like behavior.

Copyright © 2009 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In