0

Full Content is available to subscribers

Subscribe/Learn More  >

Near-Field Characteristics of a Turbulent Jet With Ring Injectors

[+] Author Affiliations
Hamid R. Rahai, Shahab Moayedian

California State University at Long Beach, Long Beach, CA

Paper No. FEDSM2009-78224, pp. 649-658; 10 pages
doi:10.1115/FEDSM2009-78224
From:
  • ASME 2009 Fluids Engineering Division Summer Meeting
  • Volume 1: Symposia, Parts A, B and C
  • Vail, Colorado, USA, August 2–6, 2009
  • Conference Sponsors: Fluids Engineering Division
  • ISBN: 978-0-7918-4372-7 | eISBN: 978-0-7918-3855-6
  • Copyright © 2009 by ASME

abstract

Mixing effectiveness of a heated turbulent jet with two-hole and three-hole ring injectors was experimentally investigated. The injectors were rings with square cross section with side dimensions of approximately 5 mm. The ratio of the ring thickness to the jet inner diameter was 4.7%. For the two-hole injector, the injecting holes were at 180 degrees from each other and for the three-hole injectors, the holes were spaced at 120 degrees. The maximum mean velocity of the jet was at approximately 4 m/s which corresponds to an approximate Reynolds number based on the jet inner diameter of 14,676. The total blowing ratio as compared to the axial momentum for each configuration was at 2%. Results indicate significant increases in RMS fluctuation and mean velocity decay with the ring injectors with these effects being more pronounced for the three-hole injection. Axial variation of momentum thicknesses indicates a possibility of axis switching in the near field for the three-hole ring injector.

Copyright © 2009 by ASME
Topics: Turbulence , Ejectors

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In