0

Full Content is available to subscribers

Subscribe/Learn More  >

Small Punch Creep Properties of Heat Affected Zones of Reduced Activation Ferritic Steel

[+] Author Affiliations
Taichiro Kato, Shin-Ichi Komazaki, Yutaka Kohno

Muroran Institute of Technology, Muroran, Japan

Hiroyasu Tanigawa

Japan Atomic Energy Agency, Ibaraki, Japan

Paper No. PVP2008-61401, pp. 1201-1206; 6 pages
doi:10.1115/PVP2008-61401
From:
  • ASME 2008 Pressure Vessels and Piping Conference
  • Volume 6: Materials and Fabrication, Parts A and B
  • Chicago, Illinois, USA, July 27–31, 2008
  • Conference Sponsors: Pressure Vessels and Piping
  • ISBN: 978-0-7918-4829-6
  • Copyright © 2008 by ASME

abstract

The small punch (SP) creep test was carried out at the temperatures of 823∼923 K by using a further miniaturized specimen, namely, TEM disk-type specimen (φ 3.0×t0.25 mm). The tests were applied to the fine grain heat affected zone (FGHAZ), tempered HAZ (THAZ) and base metal (BM), respectively, which were removed from the joint of the reduced activation ferritic steel welded by an electron beam welding, in order to investigate the creep properties of such local regimes. The results obtained from the SP creep test were correlated with those of uniaxial creep tests using the base metal (BM) and welded joint (WJ). Experimental results revealed that there were no large differences between the SP creep rupture strengths of the FGHAZ and THAZ and that of the BM at the relatively high load levels. This result was in good agreement with the fact that the uniaxial creep strength of the WJ was almost coincident with that of the BM at the relatively high stress levels. In addition, the ratio of load (P) to stress (σ), which gave same rupture time, was calculated by using the creep rupture data of the BMs. As a result, the ratio was determined to be 0.43, resulting in the following equation; P = 0.43 σ.

Copyright © 2008 by ASME
Topics: Creep , Heat , Steel

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In