0

Full Content is available to subscribers

Subscribe/Learn More  >

Role of Process and Microstructural Parameters on Mixed Mode Fracture of Sn-Ag-Cu Solder Joints Under Dynamic Loading Conditions

[+] Author Affiliations
P. Kumar, Z. Huang, I. Dutta

Washington State University, Pullman, WA

R. Mahajan, M. Renavikar, R. Sidhu

Intel Corporation, Chandler, AZ

Paper No. InterPACK2009-89205, pp. 389-396; 8 pages
doi:10.1115/InterPACK2009-89205
From:
  • ASME 2009 InterPACK Conference collocated with the ASME 2009 Summer Heat Transfer Conference and the ASME 2009 3rd International Conference on Energy Sustainability
  • ASME 2009 InterPACK Conference, Volume 1
  • San Francisco, California, USA, July 19–23, 2009
  • Conference Sponsors: Electronic and Photonic Packaging Division
  • ISBN: 978-0-7918-4359-8 | eISBN: 978-0-7918-3851-8
  • Copyright © 2009 by ASME

abstract

Electronic packages in mobile devices are often subjected to drops, leading to impact loading. Since solder joints, which serve as mechanical and electrical interconnects in a package, are particularly prone to failure during a drop, the fracture behavior of solders at high strain rates is a critical design parameter for building robust packages. Here we report on a methodology for measuring mixed-mode fracture toughness of Sn3.5Ag0.7Ag (SAC387) solder joints under dynamic loading conditions (at strain rates up to 100s−1 ), and use this method to investigate the role of solder microstructure and interfacial intermetallic compound (IMC) layer thickness on the joint fracture toughness at different mode-mixities and strain rates. Modified compact mixed mode (CMM) samples with adhesive solder joints between Cu plates and a thin film interfacial starter crack were used for the measurements. The interfacial IMC layer thickness was adjusted by controlling the dwell time during reflow, while the solder microstructure was controlled via the post-reflow cooling rate and subsequent thermal aging. The critical strain energy release rate (Gc ) was measured as a function of these microstructural and loading variables, and these data were correlated with the associated crack path, details of which were elicited through fractography as well as crack-profile observations. The crack profile studies were based on samples with double interfacial starter cracks, one of which propagated only partially. Associated with the alteration of the joint microstructure, transitions in the fracture behavior were noted. In all cases, the cracks remained confined to the interfacial region, although the details of the crack propagation path and its interaction with interfacial IMCs, the adjacent solder and the pad surface finish varied significantly. Fracture toughness decreased with an increase in the strain rate and decreased with increasing mode-mixity. A thicker/coarser interfacial IMC layer (due to high dwell times) decreased toughness, while coarser solder microstructures (due to slow cooling during reflow or post-reflow aging) increased toughness. Correlations between joint microstructure and the observed deformation and fracture mechanisms will be highlighted, and a qualitative model based explanation for the inter-play between solder and IMC, and the associated interfaces will be presented.

Copyright © 2009 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In