Full Content is available to subscribers

Subscribe/Learn More  >

Thermal Shock and Drop Test Behaviour of Area Array Packages in Forward and Backward Compatible Assemblies

[+] Author Affiliations
Bankeem V. Chheda, Sathishkumar Sakthivelan, S. Manian Ramkumar

Rochester Institute of Technology, Rochester, NY

Reza Ghaffarian

California Institute of Technology, Pasadena, CA

Paper No. InterPACK2009-89321, pp. 309-316; 8 pages
  • ASME 2009 InterPACK Conference collocated with the ASME 2009 Summer Heat Transfer Conference and the ASME 2009 3rd International Conference on Energy Sustainability
  • ASME 2009 InterPACK Conference, Volume 1
  • San Francisco, California, USA, July 19–23, 2009
  • Conference Sponsors: Electronic and Photonic Packaging Division
  • ISBN: 978-0-7918-4359-8 | eISBN: 978-0-7918-3851-8
  • Copyright © 2009 by ASME


With lead-free implementation it is important to examine the behaviour of the solder joint at the component level and at the board level. Assembly related issues along with component reliability are the main focus of this experimental research. This experimental study aims to evaluate the mechanical integrity of solder joints comprising of both lead-free and SnPb alloys. Lead-free and SnPb solder pastes were used to assemble the components. This will allow us to check the forward and the backward compatibility of the solder alloys. The test vehicle considered for this study contained a variety of components such as ultra chip scale package (UCSP192), package on package (PoP), plastic ball grid array (PBGA-676 & 1156), very thin chip array BGA (CVBGA432), thin small outline package (TSOP-40 & 48), dual row micro-lead frame (DRMLF), micro-lead frame (MLF-36 & 72), and chip resistors (0201, 0402, 0603). The scope of this paper is limited to the performance evaluation for area array packages only. Solder ball alloy for the area array packages included SAC 305, SAC405, SAC105, SnAg and SnPb. Three different PCB surface finishes, electroless nickel immersion gold (ENIG), SnPb hot air solder level (HASL), and immersion silver (ImAg) were used. Different solder ball alloys and surface finish combinations provided good comparison data for investigating the assembly performance. The PCB assemblies were subjected to mechanical shock test in the as-soldered condition and also after 200 and 500 thermal shock cycles at −55 to 125°C. For the mechanical shock test, the assemblies were subjected to 30 drops from a height of 3 ft, generating an average G force of 485N. After each drop the components were checked for the continuity of the total daisy chain. The number of drops for the first failure was used in analyzing the performance of the components for various combinations. Since each component had many independent daisy chains, the failure of the individual daisy chains was later used in determining the location of the failure and how it progressed. Two sets of test vehicles were assembled. One set comprised of components with lead-free solder balls of different composition (SAC305, SAC405, SAC105, SnAg) and the other set comprised of components with lead-free solder balls and SnPb solder balls (SAC305, SAC405, SnPb). This mix of alloy composition provided adequate data for comparison. It was critical to optimize the process in order to enable the melting of the mix of alloys. The area array package performance was evaluated when assembled with lead-free and SnPb solder paste. Some of the assemblies were cross-sectioned after the tests and the microstructure of the solder joint was analyzed to study the possible cause for assembly failure.

Copyright © 2009 by ASME
Topics: Drops , Thermal shock



Interactive Graphics


Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In