0

Full Content is available to subscribers

Subscribe/Learn More  >

Effect of Header on Latent Heat Recovery Heat Exchanger

[+] Author Affiliations
Masahiro Osakabe

Tokyo University of Marine Science & Technology, Tokyo, Japan

Paper No. POWER2011-55359, pp. 457-463; 7 pages
doi:10.1115/POWER2011-55359
From:
  • ASME 2011 Power Conference collocated with JSME ICOPE 2011
  • ASME 2011 Power Conference, Volume 1
  • Denver, Colorado, USA, July 12–14, 2011
  • ISBN: 978-0-7918-4459-5
  • Copyright © 2011 by ASME

abstract

The most part of energy losses in heat & power system is due to the heat released by the exhaust gas to atmosphere. The exhaust gas consists of non-condensable gas and steam with sensible and latent heat. As a lot of latent heat is included in the exhaust gas, its recovery is very important to improve the system efficiency. Based on the previous basic studies, a thermal hydraulic prediction method for latent heat recovery exchangers was proposed. Two kinds of compact heat exchanger with staggered banks of large and small diameter tubes were designed and fabricated based on the prediction method. In the calculations varying the various parameters, approximately the same heat recovery rate was obtained with both the heat exchangers. The more compactness was obtained with the small tubes at a desired heat recovery rate. The pressure loss in gas side was slightly smaller and that in water side was significantly larger incase of the small tube. By adapting the single header instead of conventional multi header, the pressure loss in the water side could be significantly reduced but the reduction rate of heat recovery was only between 40 to 10%.

Copyright © 2011 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In