0

Full Content is available to subscribers

Subscribe/Learn More  >

Influence of Testing Environment and Radius of Die Shoulder on SP Creep Rupture Life

[+] Author Affiliations
Ken-ichi Kobayashi, Masahiro Kaneko, Hideo Koyama

Chiba University, Chiba, Japan

Gavin C. Stratford

Swansea University, Swansea, UK

Masaaki Tabuchi

NIMS, Tsukuba, Ibaraki, Japan

Paper No. PVP2011-57736, pp. 1145-1151; 7 pages
doi:10.1115/PVP2011-57736
From:
  • ASME 2011 Pressure Vessels and Piping Conference
  • Volume 6: Materials and Fabrication, Parts A and B
  • Baltimore, Maryland, USA, July 17–21, 2011
  • Conference Sponsors: Pressure Vessels and Piping Division
  • ISBN: 978-0-7918-4456-4
  • Copyright © 2011 by ASME

abstract

Small Punch, hereinafter designated as SP, creep test has been proposed as a semi destructive testing methodology to examine the residual creep life of high temperature components. Employing low alloy steel, a series of SP creep tests were conducted on disc specimens at 600°C in air and in high vacuum to investigate the influence of oxide scale on the creep rupture life. Thickness of the oxide scale on disc specimens in air increased with the test duration, e.g., about 30μm in thickness after 400 hours. The creep rupture life in air reduced to a half of the life in vacuum due to an increase in the actual stress in the disc thickness. In addition, the magnitude of radius of a lower die shoulder affected the SP creep rupture life. The influence of this radius on the SP creep life was also studied experimentally and numerically. The creep rupture life with the die radius of 0.5mm had twice longer than that with 0.6mm. This fact was also demonstrated by the FE analysis.

Copyright © 2011 by ASME
Topics: Creep , Testing , Rupture

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In