0

Full Content is available to subscribers

Subscribe/Learn More  >

Evaluation of the Influence of Residual Stresses on Ductile Fracture

[+] Author Affiliations
Tobias Bolinder, Iradj Sattari-Far

Inspecta Technology AB, Stockholm, Sweden

Jonas Faleskog

Royal Institute of Technology, Stockholm, Sweden

Paper No. PVP2011-58080, pp. 347-356; 10 pages
doi:10.1115/PVP2011-58080
From:
  • ASME 2011 Pressure Vessels and Piping Conference
  • Volume 6: Materials and Fabrication, Parts A and B
  • Baltimore, Maryland, USA, July 17–21, 2011
  • Conference Sponsors: Pressure Vessels and Piping Division
  • ISBN: 978-0-7918-4456-4
  • Copyright © 2011 by ASME

abstract

In this work the significance of residual stresses for ductile fracture was investigated. The treatment of residual stresses as expressed in fracture assessment procedures such as the R6 method is believed to be very conservative for ductile materials, when fracture occurs at high primary loads. Earlier numerical studies have reinforced this belief. Tests on notched 3PB specimens with and without residual stresses were conducted on two ferritic steels. The residual stresses were introduced by applying a compressive pre-load on notched specimens. The tests were designed to achieve crack initiation at load levels around the limit load. The crack growth in the tests was measured by a compliance method and by colour marking of the crack surface. The crack-tip driving force J was evaluated numerically for specimens with and without residual stresses. The experimental results show that the residual stresses clearly contribute to J at low primary loads. However, this contribution diminishes as the primary loads increase. The experimental results were also compared with results evaluated using the R6 procedure. These comparisons revealed an overly high conservativeness in R6 for cases with residual stresses compared to the conservativeness for cases without residual stresses.

Copyright © 2011 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In