0

Full Content is available to subscribers

Subscribe/Learn More  >

Fabrication Methods Development for the Korea TBM First Wall in the ITER

[+] Author Affiliations
Dong Won Lee, Young Dug Bae, Suk Kwon Kim, Jae Sung Yoon, Bong Guen Hong, Yang Il Jung, Jung Yong Park, Byung Kwon Choi, Yong Hwan Jeong

Korea Atomic Energy Research Institute, Daejeon, Republic of Korea

Paper No. ICONE18-29923, pp. 605-609; 5 pages
doi:10.1115/ICONE18-29923
From:
  • 18th International Conference on Nuclear Engineering
  • 18th International Conference on Nuclear Engineering: Volume 6
  • Xi’an, China, May 17–21, 2010
  • Conference Sponsors: Nuclear Engineering Division
  • ISBN: 978-0-7918-4934-7
  • Copyright © 2010 by ASME

abstract

The Republic of Korea has proposed and designed a helium cooled molten lithium (HCML) test blanket module (TBM) to be tested in the ITER. Ferritic Martensitic Steel (FMS) and beryllium are designed to be used as structural material and armor for the TBM first wall (FW) in this design, respectively. In order to develop the fabrication method for the TBM FW, the joining methods of FMS to FMS and Be to FMS have been developed with hot istotatic pressing (HIP). For joining FMS to FMS, mock-ups were fabricated with an HIP (1050 °C, 100 MPa, 2 hours). For joining Be to FMS, two mock-ups were fabricated with the same method (580 °C, 100 MPa, 2 hours) using different interlayers. Then, in order to evaluate the integrity of the fabricated mock-ups, they were tested at the high heat flux (HHF) test facilities, KoHLTs (Korea Heat Load Test) under 1.0 MW/m2 and 0.5 MW/m2 heat fluxes of up to 1000 cycles.

Copyright © 2010 by ASME
Topics: Manufacturing

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In