0

Full Content is available to subscribers

Subscribe/Learn More  >

Optimization of Natural Air Cooling in a Vertical Channel of Electronic Equipment

[+] Author Affiliations
Yasushi Nishino, Masaru Ishizuka, Tomoyuki Hatakeyama, Shinji Nakagawa

Toyama Prefectural University, Imizu, Toyama, Japan

Paper No. IMECE2010-37028, pp. 145-153; 9 pages
doi:10.1115/IMECE2010-37028
From:
  • ASME 2010 International Mechanical Engineering Congress and Exposition
  • Volume 4: Electronics and Photonics
  • Vancouver, British Columbia, Canada, November 12–18, 2010
  • Conference Sponsors: ASME
  • ISBN: 978-0-7918-4428-1
  • Copyright © 2010 by ASME

abstract

The natural convection cooling capability in a compact item of electronic equipment was investigated quantitatively by experiment and numerical simulation with a simple channel model. The optimization of the channel sizes, especially the clearance between heated walls, was discussed. The channel model, which consists of a vertical duct of rectangular section, was applied as the experimental model of electronic equipment in this study. The channel model consists of two heated copper walls and two transparent acrylic walls. The clearance between the copper walls of the channel was varied from 5 mm to 15 mm. Temperature measurement on the copper wall surfaces and velocity measurement of natural air flow in the channel by using a particle image velocimetry (PIV) were conducted for a few clearances of the channel. Numerical simulation was also carried out, with a model following the experimental setup, for more detailed discussion of various clearances of the channel. The relationship between the clearance and the temperature rise of the walls or velocity profile was investigated. The correlation between the Rayleigh number and the Nusselt number was obtained from measured temperature. The natural cooling capability and the velocity profiles depend on the clearance between the copper walls. When the wall clearances are more than 15 mm, the cooling is not enhanced. On the other hand, in the case that the clearance becomes less than 7 mm, the cooling capability becomes significantly lower. Consequently, it is clarified that the clearance from 8 mm to 10 mm is the best size for natural cooling from the view point of the space and the capability.

Copyright © 2010 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In