0

Full Content is available to subscribers

Subscribe/Learn More  >

Optimization of Machining Parameters for Surface Roughness in EDM of AISI 1045 Based on Taguchi Technique

[+] Author Affiliations
Subodh Kumar, Sanjay Agarwal

Bundelkhand Institute of Engineering and Technology, Jhansi, India

Paper No. IMECE2010-39903, pp. 999-1005; 7 pages
doi:10.1115/IMECE2010-39903
From:
  • ASME 2010 International Mechanical Engineering Congress and Exposition
  • Volume 3: Design and Manufacturing, Parts A and B
  • Vancouver, British Columbia, Canada, November 12–18, 2010
  • Conference Sponsors: ASME
  • ISBN: 978-0-7918-4427-4
  • Copyright © 2010 by ASME

abstract

Electrical discharge machining (EDM) is a nontraditional manufacturing technique that has been widely used in the production of tools and dies throughout the world in recent years. The most important performance measure in EDM is the surface roughness. In this study, the effect and optimization of machining parameters on surface roughness in an EDM operation was investigated by using the Taguchi method. The experimental studies were conducted under varying discharge current, duty cycle and pulse-duration. An orthogonal array, the signal-to-noise (S/N) ratio, and the analysis of variance (ANOVA) were employed to the study the surface roughness in the EDM of AISI 1045 tool steel. It was observed that the discharge current was the most influential factors on the surface roughness. To validate the study, confirmation experiment has been carried out at optimum set of parameters and predicted results have been found to be in good agreement with experimental findings.

Copyright © 2010 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In