0

Full Content is available to subscribers

Subscribe/Learn More  >

Analysis of 100 and 700 rpm Cycles in Boundary Lubrication Using Fluorinated Mix Interactions Under Extreme Boundary Lubrication

[+] Author Affiliations
Gabi Nehme

University of Balamand, El-Koura, Lebanon

Paper No. IJTC2010-41044, pp. 69-71; 3 pages
doi:10.1115/IJTC2010-41044
From:
  • STLE/ASME 2010 International Joint Tribology Conference
  • STLE/ASME 2010 International Joint Tribology Conference
  • San Francisco, California, USA, October 17–20, 2010
  • Conference Sponsors: Tribology Division
  • ISBN: 978-0-7918-4419-9 | eISBN: 978-0-7918-3890-7
  • Copyright © 2010 by ASME

abstract

Tribology and solid mechanics are essential when studying engine lubrications. Very reproducible boundary lubrication tests were conducted as part of Design of Experiment software (DOE) to study the behavior of fluorinated mix in developing environmentally friendly (reduced P and S) anti-wear additives for future engine oil formulations using ball on cylinder testing protocol. In this study fully formulated oil and ZDDP plain oils were tested under the protocol of two cycles. A 100 rpm cycle was used for the first 5000 revolutions and a 700 rpm cycle was used until failure or 100000 revolutions whichever comes first. All tests were generated under extreme boundary lubrication (Hertzian contact pressure of 2.72 GPa). Design of Experiment (DOE) with 2 level factorial was used to investigate the failure and wear responses with respect to fluorinated mix interactions in plain and fully formulated oils. The two cycle’s tests indicate better performance than the one cycle test. Findings indicate that the most significant factors, affecting friction and wear are fluorinated mix concentrations together with oil formulation.

Copyright © 2010 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In