0

Modeling of Inhomogeneous Deformation in a Dielectric Elastomer Generator for Energy Harvesting FREE

[+] Author Affiliations
Tiefeng Li, Shaoxing Qu

Zhejiang University, Hangzhou, China

Christoph Keplinger, Richard Baumgartner

Johannes Kepler University, Linz, Austria

Liwu Liu

Harbin Institute of Technology, Harbin, China

Paper No. SMASIS2010-3792, pp. 267; 1 page
doi:10.1115/SMASIS2010-3792
From:
  • ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems
  • ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1
  • Philadelphia, Pennsylvania, USA, September 28–October 1, 2010
  • Conference Sponsors: Aerospace Division
  • ISBN: 978-0-7918-4415-1 | eISBN: 978-0-7918-3886-0
  • Copyright © 2010 by ASME

abstract

Dielectric elastomer transducers promise to combine high energy density at low cost and lightweight when used as actuators or for energy harvesting generators. A cornucopia of possible applications have been demonstrated over the last years including soft matter based actuators for robotics, tunable optics, medical devices, space robotics and energy harvesters. Prestretch effects and the electromechanical instability have been shown to highly influence the performance of dielectric elastomer transducers. Nevertheless only sparse research has been done on instability and prestretch effects of dielectric elastomer membranes under inhomogeneous deformation. Dielectric elastomer transducers consist of an elastomer membrane sandwiched between a pair of compliant electrodes and can be considered as deformable capacitors with variable capacitance. Here we focus on a specific experimental setup well suited to study the performance of dielectric elastomer materials for energy harvesting. In this setup an elastomer membrane is equibiaxially prestretched and fixed on top of an air chamber which is connected to a compressed air reservoir, the source of mechanical energy for thegenerator. From the electrical point of view the compliant electrodes on the elastomer membrane can be connected to both a high and low voltage charge reservoir. Thus the change in capacitance during deformation can be used to boost charges from the low voltage reservoir to the high voltage reservoir. Experimentally, different constant voltages are applied to the elastomer membrane during inflation and the air chamber pressure is recorded together with the shape and the volume of the balloon for different initial prestretches. The usual instability in the pressure-volume curves of ballon inflation experiments are shown to be influenced by applied voltage and prestretch. Theoretically, the setup is modeled as a thermodynamic system, with static electric and mechanical load where quasi-static equilibrium states can be achieved. To describe the inhomogeneous deformation and to correctly account for the hyperelastic behavior of the material over the whole deformation range an asymmetric model is built based on the Arruda-Boyce material model. The results of the numerical simulation are fitted to the experimental data to obtain significant material parameters in order to predict the optimal operation regime of the dielectric elastomer generator. The experimental results accompanied by the theoretical analysis may be used as a benchmark for the applicability of dielectric elastomer generators and pave ways for understanding the dielectric elastomer behavior under inhomogeneous deformation.

Copyright © 2010 by ASME
This article is only available in the PDF format.

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In