0

Full Content is available to subscribers

Subscribe/Learn More  >

Development of Performance Requirements for a Rail Passenger Workstation Table Safety Standard

[+] Author Affiliations
Michelle Muhlanger, Daniel Parent, Kristine Severson, Benjamin Perlman

U.S. Department of Transportation Volpe Center, Cambridge, MA

Paper No. RTDF2010-42031, pp. 147-156; 10 pages
doi:10.1115/RTDF2010-42031
From:
  • ASME 2010 Rail Transportation Division Fall Technical Conference
  • ASME 2010 Rail Transportation Division Fall Technical Conference
  • Roanoke, Virginia, USA, October 12–13, 2010
  • Conference Sponsors: Rail Transportation Division
  • ISBN: 978-0-7918-4406-9 | eISBN: 978-0-7918-3889-1

abstract

The American Public Transportation Association’s (APTA) Construction and Structural committee, a railroad industry group, with the support of the Federal Railroad Administration (FRA) and the John A. Volpe National Transportation Systems Center (Volpe Center), is creating an industry safety standard for an energy absorbing table. Workstation tables in passenger trains are an increasingly popular seating configuration both in the United States and abroad. Although a well-attached table can provide convenience and compartmentalization for the occupant, there is a risk of abdominal injury during a rail accident. In Fact, there have been several accidents in the United States in which impacts with workstation tables have severely or fatally injured occupants. In 2006, in response to these injuries, an FRA sponsored program developed a prototype table that distributed load over a wider area of the abdomen and absorbed energy during a collision. This table design was tested with specialized anthropomorphic test devices (ATDs) instrumented to measure abdominal impact response and was shown to decrease injury risk compared to a baseline table design. Building on the knowledge gained in the development of the prototype table, the proposed standard requires force to the abdomen be limited while energy is absorbed by the table. Since manufacturers do not have access specialized ATDs, researchers proposed a two part testing requirement. The first part is a quasi-static test which measures the energy absorption capacity of the table with a maximum force level determined from testing with specialized abdominal ATDs. The second part is a sled test with a standard Hybrid III 50th percentile (HIII) ATD to assess compliance with occupant protection standards of compartmentalization and ATD injury assessment reference values (IARVs). This paper discusses the research performed to develop the performance requirement in the draft standard. Current injury measures, originally developed for the automotive industry, were examined to assess their applicability to workstation table impacts. Multiple Mathematical Dynamic Models (MADYMO) model simulations show the estimated injuries during a simulated sled test scenario. Several force-crush parameters were examined, including the initial stiffness of the force-crush curve, the plateau force and the target energy absorbed by the table, to determined the force-crush design characteristics of a table that are likely to reduce injury risk. The results of this study, combined with testing of the current prototype table described in a companion paper [1], led to a draft standard that will greatly improve the safety of workstation tables in passenger rail cars.

Topics: Safety , Rails

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In