0

Full Content is available to subscribers

Subscribe/Learn More  >

Total Cooling Effectiveness on a Staggered Full-Coverage Film Cooling Plate With Impinging Jet

[+] Author Affiliations
Eui Yeop Jung, Dong Hyun Lee, Sang Hyun Oh, Kyung Min Kim, Hyung Hee Cho

Yonsei University, Seoul, Korea

Paper No. GT2010-23725, pp. 1889-1896; 8 pages
doi:10.1115/GT2010-23725
From:
  • ASME Turbo Expo 2010: Power for Land, Sea, and Air
  • Volume 4: Heat Transfer, Parts A and B
  • Glasgow, UK, June 14–18, 2010
  • Conference Sponsors: International Gas Turbine Institute
  • ISBN: 978-0-7918-4399-4 | eISBN: 978-0-7918-3872-3
  • Copyright © 2010 by ASME

abstract

In the present study, total cooling performance was experimentally investigated on a full-coverage film cooling plate with an impingement jet cooling array. The detailed temperature distributions on the film cooled surface were measured using an infra-red thermographic technique. The test plate was made of polycarbonate (k = 0.2 W/m·K) and an array jet impinged underneath the test plates. The measured cooling effectiveness is a combined result of film cooling on the surface and convective heat transfer by a jet impingement array underneath the test plate. The diameter (d) of both film cooling and impingement jet cooling holes was 5 mm. Both the streamwise and spanwise hole spacing-to-hole diameter ratios (p/d) were 3 on the film cooled plate and impingement nozzle plate. The inclination angles of the film cooling holes and impingement jet holes were 35° and 90°, respectively. The holes on each plate were arranged in a staggered pattern. The jet Reynolds number based on the hole diameter varied from 3,000 to 7,000 and the equivalent blowing rate (M) changed from 0.3 to 0.7. The combined cooling effectiveness was measured by changing the gap distance between the jet plate and the film cooling plate from 1 to 5 times the hole diameter. The staggered film cooling hole arrangement showed a higher film cooling effectiveness than the inline film cooling hole arrangement. As the blowing rate increased, the cooling effectiveness decreased on the front part of film cooling plate for a fixed height to diameter ratio (H/d). The effect of H/d on the total cooling effectiveness was not significant for the fixed blowing rate (M) in the tested range.

Copyright © 2010 by ASME
Topics: Cooling

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In