0

Full Content is available to subscribers

Subscribe/Learn More  >

Investigation of Cylindrical Pin-Fin Heat Sink Thermal Performance at High Altitude

[+] Author Affiliations
Melanie Beauchemin, Jinny Rhee

San Jose State University

Paper No. IMECE2006-13812, pp. 129-137; 9 pages
doi:10.1115/IMECE2006-13812
From:
  • ASME 2006 International Mechanical Engineering Congress and Exposition
  • Heat Transfer, Volume 3
  • Chicago, Illinois, USA, November 5 – 10, 2006
  • Conference Sponsors: Heat Transfer Division
  • ISBN: 0-7918-4786-1 | eISBN: 0-7918-3790-4
  • Copyright © 2006 by ASME

abstract

Heat sinks with cross airflow are commonly used for enhancing the cooling of electronic components. When using heat sinks in avionics applications, the primary heat transfer challenges are due to low air densities, which occur when operating at high altitudes, and space and mass constraints. Because of the spatial constraints, heat sinks with a large surface area per unit volume are advantageous. In general, cylindrical pin-fin heat sinks offer such characteristics. The Nusselt number is used as an indication of the thermal performance of the heat sink for a given Reynolds number. At high altitude, we expect the Reynolds number (based on the fin diameter and maximum velocity, Red,max ) to be smaller than 1000. Empirical correlations for the Nusselt number of cylindrical pin-fin heat sinks are available in the literature; however, these correlations were obtained for larger values of Red,max . The objective of this work is to correlate the Nusselt number and the friction factor of an in-line cylindrical pin-fin heat sink with its non-dimensional geometric parameters, and the airflow Reynolds number. The emphasis is on Red,max range between 25 and 1000, which allows the evaluation of the thermal performance of the heat sink for altitudes up to 70,000 feet. The results are obtained using three-dimensional numerical simulations with the commercial CFD software Flotherm. The numerical model is validated against experimental data. The results show that for a given Red,max, the average Nusselt number and friction factor are independent of the altitude for a given heat sink configuration. However, for a given air inlet velocity, an important drop in the average Nusselt number is observed as the altitude increases due to the reduction in air density. The effect of the variation of the fin span-wise and stream-wise pitches, as well as height is also studied.

Copyright © 2006 by ASME
Topics: Heat sinks

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In