0

Full Content is available to subscribers

Subscribe/Learn More  >

The Optimization of Variable Blank Holder Force for Sheet Metal Stamping

[+] Author Affiliations
Wu-Rong Wang, Guan-Long Chen

Shanghai Jiaotong University, Shanghai, China

Paper No. MSEC2006-21020, pp. 179-186; 8 pages
doi:10.1115/MSEC2006-21020
From:
  • ASME 2006 International Manufacturing Science and Engineering Conference
  • Manufacturing Science and Engineering, Parts A and B
  • Ypsilanti, Michigan, USA, October 8–11, 2006
  • Conference Sponsors: Manufacturing Engineering Division
  • ISBN: 0-7918-4762-4 | eISBN: 0-7918-3786-8
  • Copyright © 2006 by ASME

abstract

This paper focuses on the research of blank holding force (BHF) and proposes a new strategy to optimize the variable BHF and determine the drawing limit under the variable BHF. The optimization strategy is based on the analysis of BHF formability window and integrated into FEM code to obtain time or/and spatial optimal BHF that applies on binders. And then a stepped rectangular box of 60 mm drawing height with segmented binders and a cylinder cup without die bottom are adopted to validate the optimization strategy. Firstly, constant BHF FEM simulations through careful experiment design are conducted to discover the drawing limit height under maximum constant BHF. Secondly, FEM simulation combining the new BHF optimization strategy is carried and the optimal profile of variable BHF is determined for both step box and cylinder cup during the whole punch stroke. The result shows this stepped box could be formed successfully using 5754-0 aluminum alloy sheet, while the maximum drawing height under constant BHF is 45mm. And the drawing limit of cylinder box under optimal BHF could reach the drawing height of 61mm, which is greatly increased comparing with maximum of 47mm under constant BHF. Finally, the constant BHF experiment and the derived trajectory of optimal BHF of both geometries are verified on a multipoint variable BHF hydraulic press and the experiment results correspond well with those of FEM simulation. This new BHF optimization strategy not only helps to determine time and spatial optimal BHF for known geometry, but also assists to design maximum drawing height for unknown geometry, which makes it an effective method.

Copyright © 2006 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In