0

Full Content is available to subscribers

Subscribe/Learn More  >

Simplified Wave In Deck Analysis In Irregular Seas

[+] Author Affiliations
Thomas B. Johannessen

Aker Kvaerner Engineering & Technology, Lysaker, Norway

Paper No. OMAE2007-29628, pp. 719-724; 6 pages
doi:10.1115/OMAE2007-29628
From:
  • ASME 2007 26th International Conference on Offshore Mechanics and Arctic Engineering
  • Volume 1: Offshore Technology; Special Symposium on Ocean Measurements and Their Influence on Design
  • San Diego, California, USA, June 10–15, 2007
  • Conference Sponsors: Ocean, Offshore and Arctic Engineering Division
  • ISBN: 0-7918-4267-3 | eISBN: 0-7918-3799-8
  • Copyright © 2007 by ASME

abstract

Using a simple von Karman approach, Baarholm (2005) obtained good agreement between measured and predicted impact force underneath the deck of a GBS. This method rested, however, on a very careful second order modelling of the diffracted free surface elevation underneath the deck. In particular, the method was found to be very sensitive to the maximum wave elevation (i.e. the magnitude of the negative airgap). These requirements limit the applicability of the method since an accurate representation of the surface elevation is not usually available. In the design of an offshore structure, however, much effort is spent on determining the airgap underneath the deck. Zones with negative airgap are found by approximate calculations or by extrapolating on model test results. The method described in the present paper simplifies the problem by using Baarholm’s method subject to a known negative airgap height above the deck rather than attempting to solve the whole problem. With a known negative airgap height and using the well known expected linear shape of the wave around this maximum, a robust and conservative estimate of the deck loading can be obtained. The nonconservative property of linear theory that it underestimates the crest height is thus removed and replaced with the conservative property that too much water is present above the deck level. The paper describes this method, provides a practical design example and compares the results with model test results. The agreement with model test results is good for the single event which has been compared, but there is a clear scope for further comparison.

Copyright © 2007 by ASME
Topics: Waves , Seas

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In