0

Full Content is available to subscribers

Subscribe/Learn More  >

The Boundary Layer Over Turbine Blade Models With Realistic Rough Surfaces

[+] Author Affiliations
Hugh M. McIlroy, Jr.

University of Idaho at Idaho Falls, Idaho Falls, ID

Ralph S. Budwig

University of Idaho, Moscow, ID

Paper No. GT2005-68342, pp. 535-551; 17 pages
doi:10.1115/GT2005-68342
From:
  • ASME Turbo Expo 2005: Power for Land, Sea, and Air
  • Volume 6: Turbo Expo 2005, Parts A and B
  • Reno, Nevada, USA, June 6–9, 2005
  • Conference Sponsors: International Gas Turbine Institute
  • ISBN: 0-7918-4730-6 | eISBN: 0-7918-3754-8
  • Copyright © 2005 by ASME

abstract

Results are presented of extensive boundary layer measurements taken over a flat, smooth plate model of the front one-third of a turbine blade and over the model with an embedded strip of realistic rough surface. The turbine blade model also included elevated freestream turbulence and an accelerating freestream in order to simulate conditions on the suction side of a high-pressure turbine blade. The realistic rough surface was developed by scaling actual turbine blade surface data provided by U. S. Air Force Research Laboratory. The rough patch can be considered to be an idealized area of distributed spalls with realistic surface roughness. The results indicate that bypass transition occurred very early in the flow over the model and that the boundary layer remained unstable (transitional) throughout the entire length of the test plate. Results from the rough patch study indicate the boundary layer thickness and momentum thickness Reynolds numbers increased over the rough patch and the shape factor increased over the rough patch but then decreased downstream of the patch. It was also found that flow downstream of the patch experienced a gradual re-transition to laminar-like behavior but in less time and distance than in the smooth plate case. Additionally, the rough patch caused a significant increase in streamwise turbulence intensity and normal turbulence intensity over the rough patch and downstream of the patch. Also, the skin friction coefficient over the rough patch increased by nearly 2.5 times the smooth plate value. Finally, the rough patch caused the Reynolds shear stresses to increase in the region close the plate surface.

Copyright © 2005 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In