0

Full Content is available to subscribers

Subscribe/Learn More  >

Designing Low-Pressure Turbine Blades With Integrated Flow Control

[+] Author Affiliations
Jeffrey P. Bons, Laura C. Hansen

Brigham Young University, Provo, UT

John P. Clark, Peter J. Koch, Rolf Sondergaard

Air Force Research Laboratory, Wright-Patterson AFB, OH

Paper No. GT2005-68962, pp. 1079-1091; 13 pages
doi:10.1115/GT2005-68962
From:
  • ASME Turbo Expo 2005: Power for Land, Sea, and Air
  • Volume 3: Turbo Expo 2005, Parts A and B
  • Reno, Nevada, USA, June 6–9, 2005
  • Conference Sponsors: International Gas Turbine Institute
  • ISBN: 0-7918-4726-8 | eISBN: 0-7918-3754-8
  • Copyright © 2005 by ASME

abstract

A low pressure turbine blade was designed to produce a 17% increase in blade loading over an industry-standard airfoil using integrated flow control to prevent separation. The design was accomplished using two-dimensional CFD predictions of blade performance coupled with insight gleaned from recently published work in transition modeling and from previous experiments with flow control using vortex generator jets (VGJs). In order to mitigate the Reynolds number lapse in efficiency associated with LPT airfoils, a mid-loaded blade was selected. Also, separation predictions from the computations were used to guide the placement of control actuators on the blade suction surface. Three blades were fabricated using the new design and installed in a two-passage linear cascade facility. Flow velocity and surface pressure measurements taken without activating the VGJs indicate a large separation bubble centered at 68% axial chord on the suction surface. The size of the separation and its growth with decreasing Reynolds number agree well with CFD predictions. The separation bubble reattaches to the blade over a wide range of inlet Reynolds numbers from 150,000 down to below 20,000. This represents a marked improvement in separation resistance compared to the original blade profile which separates without reattachment below a Reynolds number of 40,000. This enhanced performance is achieved by increasing the blade spacing while simultaneously adjusting the blade shape to make it less aft-loaded but with a higher peak cp . This reduces the severity of the adverse pressure gradient in the uncovered portion of the modified blade passage. With the use of pulsed VGJs, the design blade loading was achieved while providing attached flow over the entire range of Re. Detailed phase-locked flow measurements using three-component PIV show the trajectory of the jet and its interaction with the unsteady separation bubble. Results illustrate the importance of integrating flow control into the turbine blade design process and the potential for enhanced turbine performance.

Copyright © 2005 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In