0

Full Content is available to subscribers

Subscribe/Learn More  >

Jet Impingement Heat Transfer on a Circular Cylinder by Radial Slot Jets

[+] Author Affiliations
Neil Zuckerman, Noam Lior

University of Pennsylvania

Paper No. IMECE2005-79565, pp. 67-78; 12 pages
doi:10.1115/IMECE2005-79565
From:
  • ASME 2005 International Mechanical Engineering Congress and Exposition
  • Heat Transfer, Part A
  • Orlando, Florida, USA, November 5 – 11, 2005
  • Conference Sponsors: Heat Transfer Division
  • ISBN: 0-7918-4221-5 | eISBN: 0-7918-3769-6
  • Copyright © 2005 by ASME

abstract

To better understand and facilitate design of an impinging jet device, the heat transfer on a cylindrical target exposed to radial impinging slot jets was investigated using numerical methods. Numerical models were created to test the performance of the Shear Stress Transport (SST), Standard and Realizable k-epsilon, v2 f, and Reynolds Stress Model (RSM) turbulence models versus published test data. Based on the validation study the v2 f model was ultimately selected for further work. Models were then constructed to simulate a cylinder exposed to a radial array of slot jets. Parametric variations were conducted to produce information about the influence of jet speed, nozzle count, and other independent design variables upon heat transfer. Nozzle count was varied from 2 to 8, jet Reynolds number ranged from 5,000 to 80,000, and target diameter varied from 5 to 10 times the nozzle hydraulic diameter. The interaction of adjacent opposed wall jets caused a static pressure rise and resulted in flow separation on the surface of the cylindrical target. This separation and the fountain flow between the two wall jets greatly influenced the local heat transfer, causing a rise in Nu of an order of magnitude. The resulting average Nu values varied from 19 to 217 and were condensed into a correlation equation incorporating target curvature, number of nozzles, Re, and Pr.

Copyright © 2005 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In