0

Full Content is available to subscribers

Subscribe/Learn More  >

Tribological Property of WC Cermet Coatings Sprayed by Using an Improved HVOF Process

[+] Author Affiliations
Y. Ishikawa, J. Kawakita, S. Kuroda

National Institute for Materials Science, Tsukuba, Japan

Paper No. WTC2005-63461, pp. 87-88; 2 pages
doi:10.1115/WTC2005-63461
From:
  • World Tribology Congress III
  • World Tribology Congress III, Volume 1
  • Washington, D.C., USA, September 12–16, 2005
  • Conference Sponsors: Tribology Division
  • ISBN: 0-7918-4201-0 | eISBN: 0-7918-3767-X
  • Copyright © 2005 by ASME

abstract

An improved HVOF spray process called “Gas-shrouded HVOF” (GS-HVOF) has been developed over the past several years. By using an extension nozzle at the exit of a commercial HVOF spray gun, GS-HVOF is capable of controlling the oxidation of sprayed materials during flight as well as achieving higher velocity of sprayed particles. These features result in extremely dense and clean microstructure of the sprayed coatings. The process has been successfully applied to corrosion resistant alloys such as SUS316L, HastelloyC, and alloy 625 as well as cermets such as WC-Cr3 C2 -Ni. Wear properties of WC cermet coatings were measured by using a pin-on-disk wear tester. The specific wear rates of the coatings prepared by the GS-HVOF with a reducing (fuel rich) flame were close to that of chrome plating. The wear amount of the heat-treated GS-HVOF coatings could not be detected after testing. It is believed that transition to mild wear appeared early because of the increased surface oxidation due to the heat treatment.

Copyright © 2005 by ASME
Topics: Tribology , Coatings , Cermets

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In