0

Full Content is available to subscribers

Subscribe/Learn More  >

Flow in Atomizers: Influence of Different Parameters on the Performance Characteristics of Plain Orifice Atomizer and Pressure Swirl Atomizer of a Fuel Injection System of Gas Turbine Combustor

[+] Author Affiliations
Digvijay B. Kulshreshtha, S. A. Channiwala

S V National Institute of Technology, Surat, India

Paper No. FEDSM2005-77122, pp. 1583-1591; 9 pages
doi:10.1115/FEDSM2005-77122
From:
  • ASME 2005 Fluids Engineering Division Summer Meeting
  • Volume 1: Symposia, Parts A and B
  • Houston, Texas, USA, June 19–23, 2005
  • Conference Sponsors: Fluids Engineering Division
  • ISBN: 0-7918-4198-7 | eISBN: 0-7918-3760-2
  • Copyright © 2005 by ASME

abstract

The atomization process is essentially one in which bulk liquid is converted into small drops. Basically, it can be considered as a disruption of the consolidating influence of surface tension by the action of internal and external forces. In the absence of such disruptive forces, surface tension tends to pull the liquid into the form of a sphere, since this has the minimum surface energy. Liquid viscosity exerts a stabilizing influence by opposing any change in system geometry. On the other end, aerodynamic forces acting on the liquid surface may promote the disruption process by applying an external distortion force to the bulk liquid. Breakup occurs when the magnitude of the disruptive force just exceeds the consolidating surface tension force. In twin fluid atomizers of the air-blast type and air assist type, atomization and spray dispersion tend to be dominated by air momentum forces, with hydrodynamic processes playing only a secondary role. With pressure swirl nozzles, the internal flow characteristics are of primary importance, because they govern the thickness and uniformity of the annular liquid film formed in the final discharge orifice as well as the relative magnitude of the axial and tangential components of velocity of this film. It is therefore of great practical interest to examine the interrelationships that exist between internal flow characteristics, nozzle design variables, and important spray features such as cone angle and mean drop size. The various equations that have been derived for nozzle discharge coefficient are discussed because this coefficient not only affects the flow rate of any given nozzle but also can be used to calculate its velocity coefficients and spray cone angle. Consideration is also given to the complex flow situations that arise on the surface of a rotating cup or disk. These flow characteristics are of basic importance to the successful operation of atomizers, because they exercise a controlling influence on the nature of the atomization process, the quality of atomization, and distribution of drop sizes in the spray. For plain orifice atomizers, the key geometrical variables are the orifice length and diameter. Final orifice diameter is of prime importance for pressure swirl atomizers. The absence of any theoretical treatment of the atomization process has led to the evolution of empirical equations to express the relationship between the mean drop size in a spray and the variable liquid properties. This paper includes the study of different parameters that affect the flow in plain orifice and pressure swirl atomizers. The paper also includes the performance characteristics of plain orifice and pressure swirl atomizers.

Copyright © 2005 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In