0

Full Content is available to subscribers

Subscribe/Learn More  >

Coupled Mooring Analysis and Large Scale Model Tests on a Deepwater Calm Buoy in Mild Wave Conditions

[+] Author Affiliations
T. H. J. Bunnik, G. de Boer, J. L. Cozijn

MARIN, Wageningen, The Netherlands

J. van der Cammen, E. van Haaften, E. ter Brake

Bluewater Energy Services B.V., Wageningen, The Netherlands

Paper No. OMAE2002-28056, pp. 65-76; 12 pages
doi:10.1115/OMAE2002-28056
From:
  • ASME 2002 21st International Conference on Offshore Mechanics and Arctic Engineering
  • 21st International Conference on Offshore Mechanics and Arctic Engineering, Volume 1
  • Oslo, Norway, June 23–28, 2002
  • Conference Sponsors: Ocean, Offshore, and Arctic Engineering Division
  • ISBN: 0-7918-3611-8 | eISBN: 0-7918-3599-5
  • Copyright © 2002 by ASME

abstract

This paper describes a series of model tests aimed at gaining insight in the tension variations in the export risers and mooring lines of a CALM buoy. The test result were therefore not only analysed carefully, but were also used as input and to validate a numerical tool that computes the coupled motions of the buoy and its mooring system. The tests were carried out at a model scale of 1 to 20. Captive tests in regular and irregular waves were carried out to investigate non-linearities in the wave forces on the buoy for example from the presence of the skirt. Decay tests were carried out to determine the damping of the buoy’s motions and to obtain the natural periods. Finally, tests in irregular waves were carried out. The dynamics of the mooring system and the resulting damping have a significant effect on the buoy’s motions. A numerical tool has been developed that combines the wave-frequency buoy motions with the dynamical behaviour of the mooring system. The motions of the buoy are computed with a linearised equation of motion. The non-linear motions of the mooring system are computed simultaneously and interact with the buoy’s motions. In this paper, a comparison is shown between the measurements and the simulations. Firstly, the wave forces obtained with a linear diffraction computation with a simplified skirt are compared with the measured wave forces. Secondly, the numerical modelling of the mooring system is checked by comparing line tensions when the buoy moves with the motion as measured in an irregular wave test. Thirdly, the decay tests are simulated to investigate the correctness of the applied viscous damping values. Finally, simulations of a test in irregular waves are shown to validate the entire integrated concept. The results show that: 1. The wave-exciting surge and heave forces can be predicted well with linear diffraction theory. However, differences between the measured and computed pitch moment are found, caused by a simplified modelling of the skirt and the shortcomings of the diffraction model. 2. To predict the tension variations in the mooring lines and risers (and estimate fatigue) it is essential that mooring line dynamics are taken into account. 3. The heave motions of the buoy are predicted well. 4. The surge motions of the buoy are predicted reasonably well. 5. The pitch motions are wrongly predicted.

Copyright © 2002 by ASME
Topics: Waves , Mooring , Buoys

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In