0

Full Content is available to subscribers

Subscribe/Learn More  >

Experimental Study on Flow Technology and Steel Corrosion of Lead-Bismuth

[+] Author Affiliations
Minoru Takahashi, Hiroshi Sekimoto, Kotaro Ishikawa, Naoki Sawada, Tadashi Suzuki, Susumu Yoshida, Toyohiko Yano, Masamitsu Imai

Tokyo Institute of Technology, Tokyo, Japan

Koji Hata

Nuclear Development Corporation, Tokai, Ibaraki, Japan

Suizheng Qiu

Xi’an Jiaotong University, Xi’an, P. R. China

Paper No. ICONE10-22226, pp. 607-615; 9 pages
doi:10.1115/ICONE10-22226
From:
  • 10th International Conference on Nuclear Engineering
  • 10th International Conference on Nuclear Engineering, Volume 2
  • Arlington, Virginia, USA, April 14–18, 2002
  • Conference Sponsors: Nuclear Engineering Division
  • ISBN: 0-7918-3596-0 | eISBN: 0-7918-3589-8
  • Copyright © 2002 by ASME

abstract

For the feasibility study of Pb-Bi-cooled fast reactors (FR) and the Pb-Bi target of accelerator-driven nuclear transmutation systems , Pb-Bi flow technologies were developed and steel corrosion behavior in a Pb-Bi flow was investigated using a Pb-Bi circulation loop. The performance of an electro-magnetic flow meter with electrically insulated electrodes plated with Rh was better than those of conventional and tubular types. Oxygen concentration was controlled by continuous injection of Ar, H2 and H2 O mixture gas into the Pb-Bi flow. In order to have desired oxygen potential, the partial pressure ratio of PH2 /PH2O was chosen in the range from 0.12 to 2.2 by bubbling the mixture of Ar and H2 in water columns at the room temperature. By injecting the mixture gas into the loop for sufficient time, the oxygen potentials measured by the oxygen sensor made of solid electrolyte ZrO2 -Y2 O3 agreed well with those in the injected gas mixture. In the first corrosion test, steels were exposed to a Pb-Bi flow at the temperature of 550 °C, the velocity of 2 m/s and the oxygen concentration of ∼5.0×10−7 wt.% for 959 hours. It was found that the weight loss was larger in the order of SS316, low Cr steel (SCM420) and high Cr steels (STBA26, SUS405, SUS430). Corrosion was suppressed by a Cr oxide layer for high Cr steels. A porous layer was formed on SS316 surface due to high solubility of Ni in Pb-Bi. In the second corrosion test, the oxygen concentration was kept at 3.6×10−7 wt.% by injecting Ar, H2 and H2 O mixture gas into a Pb-Bi flow, and steels were exposed to a Pb-Bi flow at the temperature of 550 °C, the velocity of 2 m/s for 1000 hours. Serious erosion damage was observed in SCM420 at the entrance, and some erosion damages appeared in low Cr steels: SCM420, F82H, STBA26 and HCM12 downstream. Crack type damage was observed on the surface of HCM12, and pitting-type damage was observed on the surface of 2 1/4Cr-1Mo steel. Some penetration of Pb-Bi into the materials appeared in some of the erosion-damaged steels.

Copyright © 2002 by ASME

Figures

Tables

Interactive Graphics

Video

Country-Specific Mortality and Growth Failure in Infancy and Yound Children and Association With Material Stature

Use interactive graphics and maps to view and sort country-specific infant and early dhildhood mortality and growth failure data and their association with maternal

NOTE:
Citing articles are presented as examples only. In non-demo SCM6 implementation, integration with CrossRef’s "Cited By" API will populate this tab (http://www.crossref.org/citedby.html).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In